攸人 
YOUNET 
2004-9-13 最近看到有些朋友從客服得到了SX1的解鎖碼，卻還是出現解鎖失敗的情況，我分析這里有幾種情況導致問題：
最大的可能是在解鎖時輸入解鎖碼出錯，
第二種情況，由于IMEI號碼比較長，容易打錯，可能你在發送email填寫自己機身IMEI碼時出錯，從而造成“連環錯”，客服提供的解鎖碼當然就不對，
最不可能的一種情況就是客服提供的解鎖碼是無效的。
對此，我整理了一下西門子澳洲客服回信中提示用戶注意的解鎖要領，希望對大家順利解鎖有幫助。
回信原文：To unlock your handset, please do the following:
1.Remove your Sim card and switch on your handset.
2.Once you switch on your handset, the display would show "insert sim card. Enter the master code.
3.A "Please wait" message will after you press on the last "#" symbol of the mastercode provided.
4.If you have successfully unlock your handset, it should display "phone code deleted!" However, should you encounter "Incorrect!
Please wait" or "Invalid Entry!, you have to switch the phone off and try again.
Note: If you entered the mastercode incorrectly, it would take longer than usual to unlock the phone because the turnaround time
would increase exponentially. Your best bet is to switch off the phone and try to key in that mastercode next day.
I suggest that you maintain a copy of both the Master Code on a piece of paper for your own reference in the future.
其中提到的解鎖要領：
1，取下SIM卡，開機
2，開機后，屏幕顯示“插入SIM卡，輸入解鎖碼”
3，當你輸入完解鎖碼最后一個“＃”號，會顯示“請稍候”
4，如果解鎖成功，會顯示“安全碼已經刪除”，但如果顯示“錯誤！請稍等”或“輸入錯誤”，那您只能關機并重新嘗試了。
注意：如果你輸入錯誤的解鎖碼，之后的解鎖時間將比通常要更長，因?yàn)閺?fù)位時間將程曲線增長。這時您最好關機并隔天在嘗試輸入以上解鎖碼。
建議您在一張紙上記錄下這個解鎖碼，以備日后不時之需。
